Professional auto detailing differs from a simple car wash. Professional auto detailing not only washes the car but helps restore it to a condition similar to the new one.
Bead Maker is used in the automotive detail community to protect a vehicle’s paint. Can you use Bead Maker on glass?
P’S Bead Maker Paint Protectant is a polymer sealant that you can apply to waxed, sealed, and ceramic-coated vehicles.
You can use it on a wet or dry surface and on paint, clear coat, glass, rubber, plastic, and more to seal the surface and produce a water-beading finish.
Below we will take a closer look at Bead Maker and see if you can use it on your glass.
What is Bead Maker?
The P’S company develops Bead Maker. It uses a binding polymer monomer technology to attach to the surface of a vehicle.
Once it is attached, the molecules cross-links and polymerize to the surface. It creates a layer of protection that is highly hydrophobic and very durable.
What Does Bead Maker do?
Bead Maker is designed to protect the paint surface from dirt, grime, and even UV rays and leaves its surface with a slick, glossy finish.
Not only does it help keep your vehicle’s paint shiny, but it also takes that shine to the next level. It will help keep your paint looking its best and protect it from dirt and damage from water and the sun.
Where Can You Apply Bead Maker?
Bead Maker can be applied to all types of surfaces. You can use it to protect your vehicle’s paint, as well as rubber, glass, plastic, and more.
It will bond to these surfaces and help them repel any dirt and water that comes in contact with them.
How Do You Apply Bead Maker?
Bead Maker can be used with wax or applied as a stand-alone product. It is best used when applied to a clean, freshly detailed vehicle.
When applying to a dry vehicle, you must lightly mist the surface and use a microfiber towel to spread the product.
If using it alone, you should use a liberal amount and spread the product a little longer to establish a thick base.
When the vehicle is wet, you can also use Bead Maker to the dry application to assist you when drying the car.
After it is applied, Bead Maker will dry it to a streak-free finish. You can be assured it will not dry and leave any blemishes commonly found when using other waxes and ceramic-based products.
It will take eight hours for the product to cure fully.
Can Bead Maker Be Applied to Glass?
Bead Maker can be applied to your vehicle’s glass to give it the same protection and water-repellant properties as it has on your vehicle’s painted surfaces.
Once it dries and cures, you will notice its water-repellant behaviors.
It dries clear, will not leave streaks, and keeps your windows clean and clear. It will assist you in wet and adverse weather conditions by repelling the water away from the glass surfaces of your vehicle.
There has not been a report of any issues when using it on the glass surfaces of a vehicle.
There has not been any discoloration or issues when leaving Bead Maker on the glass or any other part of your vehicle for an extended amount of time.
How to Properly Apply Bead Maker on Glass Surfaces?
To properly apply Bead Maker on glass surfaces, follow these steps:
- Clean the glass surface thoroughly, removing dirt, grime, or residue.
- Lightly mist the surface with Bead Maker and use a microfiber towel to spread the product evenly.
- Use a liberal amount and spread the product, working it into the surface for a few minutes to establish a thick base.
- Allow the product to dry and cure for at least 8 hours before using the vehicle or wiping down the glass surface.
- Repeat the application process as needed to maintain the water-repellent properties of the glass. Applying in a shaded area is also recommended to avoid product evaporation.
Maintenance and Re-application of Bead Maker on Glass Surfaces
Re-apply the product after every wash to keep the water-repellent properties. Bead Maker’s performance and durability on glass surfaces may be affected by weather conditions, frequency of usage, and proper maintenance.
Potential Drawbacks or Limitations of Using Bead Maker on Glass Surfaces.
Using Bead Maker on glass surfaces may have the following potential drawbacks or limitations:
- It may be difficult to remove if it’s over-applied or if it needs to be applied evenly.
- It may not perform as well in extremely cold or hot temperatures or areas with heavy rain or snowfall.
- When applied to a wet surface, the product may only last for a short time.
- It is not recommended to use Bead Maker on tempered or laminated glass, as it may cause damage to the glass.
- Some users may prefer a lower gloss finish than the product leaves on the glass surface.
- It may not be suitable for all types of vehicles, primarily classic, vintage, or luxury, as it may not be compatible with the original factory coating.
Please read the product’s instructions carefully and test it on a small inconspicuous area before applying it on the whole surface to ensure it’s compatible with the surface and your desired results.
How Long Does Bead Maker Last?
Bead Maker can last up to a month when applied to a clean, dry car. It only lasts for a short time when applied to a wet vehicle.
It is easy to apply and can be used after every wash to continue to give you continuous protection.
Since you can apply it to multiple surfaces, spray it down an entire vehicle in less than ten minutes, giving you a streak-free glossy shine over your complete car.
Conclusion
Bead Maker is a polymer sealant that bonds to the surfaces and protects from dirt, grime, and UV rays. It’s applied to waxed, sealed, and ceramic-coated paint to create a layer of protection that is highly hydrophobic and very durable.
You can use it on multiple surfaces, such as plastic and glass, to offer the same water-repelling properties and durability as the paint.
You can use Bead Maker on your vehicle’s glass to give it the same protection and water-repellant properties as the rest of your car.
It dries to a clean and clear streak free shink and will not block your vision at any time. It will cause any water on your windshield to bead and assist you when driving in rain or other adverse conditions.