As a car owner, ensuring your vehicle’s glass surfaces are well-protected and maintained is crucial to its appearance and safety.
Bead Maker, a versatile spray-on polymer sealant, has become increasingly popular for offering exceptional water repellency, protection from dirt build-up, and increased glass durability.
This comprehensive guide explores the benefits of using Bead Maker on your car’s glass surfaces and provides an easy step-by-step tutorial to achieve optimal results.
Key Takeaways
- Bead Maker is a spray-on polymer sealant that improves visibility during rainy weather, protects against water stains and dirt build-up, and increases the durability of car glass.
- To apply Bead Maker on car glass, start by cleaning the surface thoroughly with a quality glass cleaner and ensuring it’s dry. Then, using a microfiber towel, apply Bead Maker in straight lines over the surface of your car glass. Finally, buff and wipe off any excess product to keep your car glass pristine for extended periods between washes.
- To maintain the effectiveness of Bead Maker on car glass, avoid washing the car for 24 hours after application. Re-apply periodically every six months or so to maintain its effectiveness. Store it in a cool, dry place like a garage or basement.
Benefits Of Bead Maker For Car Glass
Bead Maker provides improved visibility during rainy weather and protects against water stains and dirt build-up while also increasing the durability of car glass.
Improved Visibility in Rainy Weather
One of the primary benefits of applying Bead Maker to your car’s glass surfaces is its ability to significantly improve visibility during rainy weather. The hydrophobic properties of this innovative product make water droplets bead up and roll off the windshield, much like how a well-waxed paint finish repels water.
Imagine driving down a busy highway in heavy rain; with Bead Maker applied to your windshield, you’ll notice that the water beads up and rolls away much faster than on untreated surfaces.
It almost feels magical! Not only does it help provide better visibility in such situations, but it also reduces reliance on windshield wipers and minimizes streaking caused by ineffective wiper-blade performance.
Protection Against Water Stains and Dirt Build-up
Thanks to the hydrophobic properties of Bead Maker, your car’s glass will be protected against water stains and dirt build-up. This means that rainwater, mud splatters, bird droppings, and other contaminants are less likely to stick to the surface of your windshield or windows.
With Bead Maker, you can enjoy a clearer view while driving in rainy weather without constantly using your wipers. Moreover, cleaning your car’s glass becomes easier when no stubborn grime is stuck on it.
In addition to preventing dirt build-up from sticking onto the surface of car glass, applying Bead Maker also increases its durability by forming a strong protective layer over it.
The polymer sealant creates an invisible barrier around the glass that repels unwanted particles from adhering to it quickly; this guarantees longevity irrespective of harsh weather conditions or frequent usage compared with other paint sealants.
Increased Durability of Car Glass
After applying Bead Maker on car glass, it provides an additional layer of protection that increases the durability of your car’s glass. This means it can withstand more wear and tear, reducing the likelihood of costly repairs or replacements.
Furthermore, Bead Maker creates a water-repellent barrier that helps prevent water spots and stains from forming on your car windows. With increased durability and protection comes peace of mind knowing that you have taken steps to extend the life of your car’s glass surfaces.
Step-by-Step Guide on How to Apply Bead Maker on Car Glass
To apply Bead Maker on car glass, start by cleaning the surface with a glass cleaner and ensuring it is dry before spraying the product onto a microfiber towel and gently rubbing it onto the glass in straight lines.
Clean the Glass Surface
Before applying Bead Maker to your car’s glass surfaces, it is essential to clean them thoroughly. Start using a quality glass cleaner and lint-free paper towels or microfiber cloth to remove dirt, grime, or smudges from the windows.
Ensure the glass surface is dry before proceeding with the Bead Maker application.
Moreover, ensure you have removed all improper cleaners, such as ammonia-based ones, which could damage the protective layer provided by Bead Maker.
Once you have cleaned the glass surface, it will be ready for the Bead Maker application. It will ensure maximum performance from this hydrophobic spray sealant solution on your vehicle’s auto-glass surfaces.
Apply Bead Maker Using A Microfiber Towel
Once you’ve cleaned your car glass with a quality glass cleaner, it’s time to apply Bead Maker. I recommend using a microfiber towel for application as it helps ensure even and thorough coverage.
Begin by shaking the bottle of Bead Maker well to activate the sealant formula. Then, spray a small amount onto the towel and wipe in straight lines over the surface of your car glass.
Using a microfiber towel also helps prevent unwanted residue from being left on your windshield or windows, which can negatively impact visibility while driving.
Remember to buff and wipe off any excess product after applying Bead Maker to keep your car glass pristine for extended periods between washes.
Buff and Wipe Off Excess Product
Once you have applied the Bead Maker to your car glass using a microfiber towel, buffing and wipings off any excess product is essential.
This step ensures the surface remains streak-free and clear, giving you maximum visibility while driving in different weather conditions.
To do this, use a clean microfiber towel to gently buff the surface in circular motions until all excess product has been removed.
It is also worth noting that Bead Maker should be allowed to cure for at least 24 hours after application before washing your car.
This will allow the product enough time to bond properly with the surface and provide long-lasting protection against water stains, dirt build-up, and other elements that can damage your car’s glass over time.
Maintenance Tips for Bead Maker Applied Car Glass
To maintain the effectiveness of Bead Maker on car glass, avoid washing the car for 24 hours after application, re-apply periodically, and store the product in a cool, dry place.
Avoid Washing the Car for 24 Hours After Application
After applying Bead Maker on your car’s glass, avoid washing it for at least 24 hours. This allows the product to fully cure and bond with the surface, ensuring maximum protection against water stains and dirt build-up.
Additionally, avoid exposing the car to rain or extreme weather conditions during this time. Instead, keep it in a sheltered area until it has fully cured. Doing so ensures that your vehicle stays protected from harsh elements while prolonging Bead Maker’s effectiveness.
Re-apply Periodically
After applying Bead Maker on your car’s glass, it is important to re-apply the product periodically to maintain its effectiveness. The frequency of reapplication will depend on various factors, such as weather conditions and how frequently you use your car.
If you notice that water no longer beads up on your windshield or that dirt and grime are starting to build up, it may be time to apply a fresh coat of Bead Maker.
By consistently applying Bead Maker and checking for signs that it needs to be re-applied, you can help protect your car’s glass from water damage and other types of wear and tear.
Store Bead Maker in A Cool, Dry Place
Store it in the right conditions to ensure that Bead Maker stays effective for as long as possible. I recommend storing it in a cool, dry place like a garage or basement.
Exposure to direct sunlight and extreme heat can reduce its effectiveness over time.
Proper storage of Bead Maker ensures that you’ll get maximum protection for your car glass in every application. It’s also good to track when you first opened the bottle to know when it’s time for a replacement.
Conclusion
This comprehensive guide teaches you how to apply Bead Maker on your car’s glass. It improves visibility in rainy weather and protects against water stains and dirt build-up while enhancing the durability of your automobile’s glass.
Follow the steps correctly and maintain clean surfaces for best performance. Applying Bead Maker is a simple yet effective solution.that saves you money on costly repair services in the long run.